This article describes how to resolve several common HoloLens issues.
Before you start any troubleshooting procedure, make sure that your device is charged to 20 to 40 percent of battery capacity, if possible. The battery indicator lights located under the power button are a quick way to verify the battery capacity without logging into the device.
Fixed Known Issues
- Fixed - HoloLens user can’t launch Microsoft Edge
- Fixed - Every time the power goes to 18 percent, the device suddenly shuts down automatically
- Fixed - OneDrive UWP app doesn't work for Azure AD users
- Fixed - Remote Assist video freezes after 20 minutes
- Fixed - Downloading locked files doesn't show error
- Fixed - Device Portal file upload/download times out
- Fixed - OneDrive doesn't automatically upload pictures
- Remote Wipe doesn't remove device from Intune
- Why do I see 0x80180014 during Autopilot?
- Microsoft Store error code 0x80131500
- File Explorer and pickers can't select OneDrive
- Microsoft Edge fails to start the microphone
- Auto-login asks for log-in
- Some users may encounter an update failure with Insider build 20346.1466
- Microsoft Edge fails to launch
- Keyboard doesn't switch to special characters
- Blue screen after unenrolling from Insider preview on a device flashed with an Insider build
- HoloLens is unresponsive or won't start
- "Low Disk Space" error
- Calibration Fails
- Can't sign in because my HoloLens was previously set up for someone else
- Unity isn't working
- Windows Device Portal isn't working correctly
- The HoloLens Emulator isn't working
- Bluetooth devices aren't pairing
- USB-C Microphone isn't working
- Devices listed as available in Settings don't work
Fixed - HoloLens user can’t launch Microsoft Edge
This was fixed in Windows Holographic, version 22H1.
If you've having an issue launching Microsoft Edge on your HoloLens, you may have policy that's preventing launch. HoloLens can't launch Microsoft Edge if ApplicationManagement/AllowAllTrustedApps GPO is disabled. If AllowAllTrustedApps GPO is disabled, Appx doesn't trust the app as a Microsoft published app, which blocks installing / launching Microsoft Edge with HoloLens devices.
Workarounds to launch Microsoft Edge
- Set ApplicationManagement/AllowAllTrustedApps GPO value to Enabled/ Default.
- User enables Developer mode.
Fixed - Every time the power goes to 18 percent, the device suddenly shuts down automatically
This was fixed in Windows Holographic, version 21H2 - November 2021 Update
A known issue is that when the device reaches 18% battery, it will shut down unexpectedly. This is a software issue, not a hardware or battery issue, so do not exchange devices for this. If you're unsure if your issue matches this bug, please:
- Ensure optional diagnostics are enabled on your device(s)
- Reproduce the problem
- Submit a Feedback Hub issue
- Share the Feedback issue URL
- Contact support
Fixed - OneDrive UWP app doesn't work for Azure AD users
This issue resolved in app version 19.23.17. If you still experience the same sign in issue while using app version 19.23.17 or later, please send Feedback then contact support and share the Feedback item URL.
Follow these instructions to update your OneDrive app. You can check which version of OneDrive you have by using the Microsoft Store app, then select the "See more" button represented by the ... then select Downloads and updates.
If you use OneDrive For Business using your Azure AD account, you may have encountered an error when signing in to your inbox OneDrive app. Not being able to sign into the OneDrive app doesn’t affect automatic uploads of images and videos captured by the Camera app. Your files can still be saved and accessed from the OneDrive for Business cloud storage. The OneDrive and HoloLens teams are working on the issue.
Prerequisite: Customers can use Microsoft Edge and device OS is update to a Windows Holographic, 21H1 build or newer.
If you're experiencing this issue, try one of the following:
- Users can directly access OneDrive For Business from Microsoft Edge, and interact with their files the website from their browser.
- Users can install the OneDrive PWA app to HoloLens by downloading it from Microsoft Edge. This will allow users to view and manage files on the device again. Read and follow these instructions for installing the OneDrive PWA app on your HoloLens.
Fixed - Remote Assist video freezes after 20 minutes
There is a newer version of Remote Assist which has a fix for this issue. Please update Remote Assist to the latest version to avoid this issue.
Due to this Known Issue's severity we had temporarily paused the availability of Windows Holographic, version 21H1. The 21H1 build is now available again, so devices may once again be updated to the latest 21H1 build.
On the latest release of Windows Holographic, version 21H1, some users of Remote Assist have experienced video freezing during calls over 20 minutes. This is a known issue.
Workarounds to fix Remote Assist
If you're unable to update Remote Assist to a newer build, try the following workaround:
Restart in between calls
If your calls are going over a length of 20 minutes and you're experiencing this issue, try rebooting your device. Rebooting your device between Remote Assist calls will refresh your device and put it back into a good state.
To quickly restart a device on Windows Holographic, version 21H1 open the start menu, and select the user icon, then select Restart.
Fixed - Downloading locked files doesn't error
This is a known issue that was fixed in Windows Holographic, version 21H1 - July 2021 Update.
In previous builds of Windows Holographic, when attempting to download a locked file, the result would be an HTTP error page. In the Windows Holographic, version 21H1 update, trying to download a locked file results in nothing visible happening—the file doesn’t download and there’s no error.
Fixed - Device Portal file upload/download times out
This is a known issue that was fixed in Windows Holographic, version 21H1 - July 2021 Update. If you previously disabled SSL Connection as part of the workaround, we highly recommend you re-enable it.
Some customers have found, when attempting to upload or download files, the operation might appear to hang and then time out or never complete. This is separate from the 'file locked' known issue -- this affects Windows Holographic, versions 2004, 20H2 and 21H1 in-market builds. The problem has been root caused to a bug in Device Portal's handling of certain requests, and is most consistently hit when using https, which is the default.
Workaround for device portal time out
This workaround, which applies equally to Wi-Fi and UsbNcm, is to disable the "required" option under "SSL Connection". To do so, navigate to Device Portal, System, and select the Preferences page. In the Device Security section, locate SSL Connection, and uncheck to disable Required.
The user should then go to http://, not https:// (IP address) and features like file upload and download will work.
Fixed - OneDrive doesn't automatically upload pictures
The OneDrive app for HoloLens doesn't support automatic camera upload for work or school accounts. This known issue has been fixed. For more information on automatically uploading your mixed reality photos and videos for work or school account, see Share your mixed reality photos and videos.
Workarounds before the fix:
If viable for your business, automatic camera upload is supported on consumer Microsoft accounts. You can sign in to your Microsoft account in addition to your work or school account (the OneDrive app supports dual sign-in). From your Microsoft account profile within OneDrive you can enable automatic, background camera roll upload.
If you can’t safely use a consumer Microsoft account for uploading your photos automatically, you can manually upload photos to your work or school account from the OneDrive app. To do that, make sure you're signed into your work or school account in the OneDrive app. Select the + button and choose Upload. Find the photos or videos you want to upload by navigating to Pictures > Camera Roll. Select the photos or videos you want to upload, and then select the Open button.
Remote Wipe doesn't remove device from Intune
When deleting a HoloLens device from Intune via the Wipe command, the device will be sent the wipe command. This command will wipe the device, however Intune won't receive confirmation that the HoloLens was wiped. This will leave the Wipe button as clicked, and "Wipe pending..." for the device.
Workaround for remote wipe
Immediately after selecting Wipe we suggest also selecting the Delete button next to wipe. Otherwise you'll have left over device objects or even see another known issue for Autopilot.
Why do I see 0x80180014 during Autopilot?
This error is typically encountered during device reset and re-use flows where a HoloLens device has gone through Autopilot at least once. In order to resolve this issue, please delete the device from Microsoft Intune and reset it again to complete Autopilot flow.
For more info, please refer to troubleshooting steps on the autopilot page.
Microsoft Store error code 0x80131500
Some users may experience the Microsoft Store working not as expected, and see the error code 0x80131500. This is an issue caused by the region set on the HoloLens not being available in the Microsoft Store app on HoloLens. If you encounter error code 0x80131500, to work around please:
- Set Settings > Time & Language > Region > Country or region, to one of the following:
- United States, Japan, Germany, Canada, United Kingdom, Ireland, France, Australia, New Zealand.
- Restart the Store app.
- For the whole device to reflect the change, the device will need to be restarted.
The HoloLens team is working on adding support for more regions.
See here for countries to buy HoloLens 2.
File Explorer and pickers can't select OneDrive
There have been some changes and updates to the OneDrive app over time. If you were previously using the File Explorer, or a file picker app to select files from OneDrive, you'll find this is no longer available since the previously fixed OneDrive UWP app issue. This is because the new app doesn't register itself as a file picker or share target.
Work around : Use the OneDrive app and move files locally to the device as needed.
For code samples using OneDrive via Microsoft Graph APIs visit the developer documentation for OneDrive.
Microsoft Edge fails to start the microphone
When users using Microsoft Edge the microphone can fail to start, thus not being usable to interact with Microsoft Edge in HoloLens. This known issue is related to the version of the Microsoft Edge app, please don't reflash your device to an earlier version as this won't fix this issue.
Who is affected?
Users who have Microsoft Edge version 93, 94, or 95. You can check which version of Microsoft Edge you have by using the Microsoft Store app, then select the "See more" button represented by the ... then select Downloads and updates.
The current fix is in version 96, which is available to users who have enrolled in Microsoft Edge Insiders. This is different than enrolling your device as a Windows Insider. Read these instructions for details on how to enroll into Microsoft Edge’s insider program.
Auto-login asks for log-in
A HoloLens 2 device can be configured to automatically log in through Settings -> Accounts -> Sign-in Options -> and under Required setting the value to Never. Some users may be required to log in to the device again during a substantially large update, such as a feature update. This is a known issue.
Example of when this could occur:
- Updating a device from Windows Holographic, version 2004 (Build 19041.xxxx) to Windows Holographic, version 21H1 (Build 20346.xxxx)
- Updating a device to take a large update on the same major build, for example, Windows Holographic, version 2004 to Windows Holographic, version 20H2
- Updating a device from a factory image to the latest image
This shouldn't occur during:
- Devices taking a monthly servicing update
Work around methods:
- Sign-in methods such as PIN, Password, Iris, Web Authentication, or FIDO2 keys.
- If device PIN cannot be remembered, and other authentication methods aren't available, then a user can use manual reflashing mode.
Some users may encounter an update failure with Insider build 20346.1466
If a user has taken an update to the Insider flight, 20346.1466, and it doesn’t appear to be finishing the boot, a clean reflash may be required to move forward again. To see if you’ve encountered this:
- Reboot – Hold down the power until the LED’s step down.
- Power up.
- Confirm you see the Windows flag at the beginning of the boot and it goes black shortly after that.
- Connect your HoloLens2 to your PC with USB and run Advanced Recovery companion.
- Select the HoloLens.
- If the version says you’re running the 20346.1466 build, you likely hit this issue.
Who does this tend to affect
Users who have been using their device without flashing it since Windows Holographic, version 2004.
Users who are typically unaffected
Users who have flashed their device, or unboxed their device, and started using it since Windows Holographic, version 21H1.
Workaround for Insider update issue
Microsoft Edge fails to launch
This issue was originally created with the shipping version of Microsoft Edge in-mind. This issue may be resolved in the new Microsoft Edge. If it is not, please file feedback.
A few customers have reported an issue where Microsoft Edge fails to launch. For these customers, the issue persists through reboot and isn't resolved with Windows or application updates. If you're experiencing this issue and you've confirmed Windows is up-to-date, please file a bug from the Feedback Hub app with the following category and sub-category: Install and Update > Downloading, installing, and configuring Windows Update.
There are no known workarounds as we've been unable to root cause the issue so far. Filing a bug via Feedback Hub will help our investigation! This is a known issue.
Keyboard doesn't switch to special characters
There is an issue during OOBE, where once the user has chosen a work or school account and is entering their password, trying to switch to the special characters on the keyboard by tapping the &123 button doesn't change to special characters. This is a known issue.
- Close the keyboard and reopen it by tapping the text field.
- Incorrectly enter your password. When the keyboard is relaunched next time, it will then work as expected.
- Web Authentication, close the keyboard and select Sign in from another device.
- If entering only numbers, a user may press and hold certain keys to open an expanded menu.
- Using a USB keyboard.
This doesn't affect:
- Users who choose to use a personal account.
Blue screen after unenrolling from Insider preview on a device flashed with an Insider build
This is an issue affecting that affects users who are were on an Insider preview build, reflashed their HoloLens 2 with a new insider preview build, and then unenrolled from the Insider program. This is a known issue.
This doesn't affect:
- Users who aren't enrolled in Windows Insider
- If a device has been enrolled since Insider builds were version 18362.x
- If they flashed an Insider signed 19041.x build AND stay enrolled in the Insider program
Avoid the issue
- Flash a non-insider build. One of the regular monthly updates.
- Stay on Insider Preview
Reflash the device
Put the HoloLens 2 into flashing mode manually by fully powering down while not connect. Then while holding the Volume up button, tap the Power button.
Connect to the PC and open Advanced Recovery Companion.
Flash the HoloLens 2 to the default build.
HoloLens is unresponsive or won't start
If your HoloLens won't start:
- If the LEDs next to the power button don't light up, or only one LED briefly blinks, you may need to charge your HoloLens.
- If the LEDs light up when you press the power button but you can't see anything on the displays, do a hard reset of the device.
If your HoloLens becomes frozen or unresponsive:
- Turn off your HoloLens by pressing the power button until all five of the LEDs turn themselves off, or for 15 seconds if the LEDs are unresponsive. To start your HoloLens, press the power button again.
"Low Disk Space" error
You'll need to free up some storage space by doing one or more of the following:
- Delete some unused spaces. Go to Settings > System > Spaces, select a space that you no longer need, and then select Remove.
- Remove some of the holograms that you've placed.
- Delete some pictures and videos from the Photos app.
- Uninstall some apps from your HoloLens. In the All apps list, tap and hold the app you want to uninstall, and then select Uninstall.
Calibration should work for most people, but there are cases where calibration fails.
Some potential reasons for calibration failure include:
- Getting distracted and not following the calibration targets
- Dirty or scratched device visor or device visor not positioned properly
- Dirty or scratched glasses
- Certain types of contact lenses and glasses (colored contact lenses, some toric contact lenses, IR blocking glasses, some high prescription glasses, sunglasses, or similar)
- More-pronounced makeup and some eyelash extensions
- Hair or thick eyeglass frames if they're blocking the device from seeing your eyes
- Certain eye physiology, eye conditions, or eye surgery such as narrow eyes, long eyelashes, amblyopia, nystagmus, some cases of LASIK or other eye surgeries
If calibration is unsuccessful try:
- Cleaning your device visor
- Cleaning your glasses
- Pushing your device visor as close to your eyes as possible
- Moving objects in your visor out of the way (such as hair)
- Turning on a light in your room or moving out of direct sunlight
If you followed all guidelines and calibration is still failing, you can disable the calibration prompt in Settings. Also let us know by filing feedback in Feedback Hub.
Also see related information for image color or brightness troubleshooting.
Setting IPD isn't applicable for HoloLens 2, since eye positions are computed by the system.
Can't sign in because my HoloLens was previously set up for someone else
You can put the device into Flashing Mode and use Advanced Recovery Companion to recover the device.
Unity isn't working
- See Install the tools for the most up-to-date version of Unity recommended for HoloLens development.
- Known issues with the Unity HoloLens Technical Preview are documented in the HoloLens Unity forums.
Windows Device Portal isn't working correctly
The Live Preview feature in Mixed Reality capture may exhibit several seconds of latency.
On the Virtual Input page, the Gesture and Scroll controls under the Virtual Gestures section aren't functional. Using them will have no effect. The virtual keyboard on the virtual input page works correctly.
After enabling Developer Mode in Settings, it may take a few seconds before the switch to turn on the Device Portal is enabled.
The HoloLens Emulator isn't working
Information about the HoloLens emulator is located in our developer documentation. Read more about troubleshooting the HoloLens emulator.
- Not all apps in the Microsoft Store are compatible with the emulator. For example, Young Conker and Fragments aren't playable on the emulator.
- You can’t use the PC webcam in the Emulator.
- The Live Preview feature of the Windows Device Portal doesn't work with the emulator. You can still capture Mixed Reality videos and images.
Voice commands aren't working
If Cortana isn't responding to your voice commands, make sure Cortana is turned on. On the All apps list, select Cortana > Menu > Notebook > Settings to make changes. To learn more about what you can say, see Use your voice with HoloLens.
On HoloLens (1st gen), built-in speech recognition isn't configurable. It's always turned on. On HoloLens 2, you can choose whether to turn on both speech recognition and Cortana during device setup.
If your HoloLens 2 isn't responding to your voice, make sure Speech recognition is turned on. Go to Start > Settings > Privacy > Speech and turn on Speech recognition.
Hand input isn't working
To ensure that HoloLens can see your hands, you need to keep them in the gesture frame. The Mixed Reality Home provides feedback that lets you know when your hands are tracked. The feedback is different on different versions of HoloLens:
- On HoloLens (1st gen), the gaze cursor changes from a dot to a ring
- On HoloLens 2, a fingertip cursor appears when your hand is close to a slate, and a hand ray appears when slates are further away
If you are wearing gloves, note that some types of gloves do not work with hand tracking. A common example is black rubber gloves, which tend to absorb infrared light and are not picked up by the depth camera. If your work involves rubber gloves, we recommend trying a lighter color such as blue or gray. Another example is large baggy gloves, which tend to obscure the shape of your hand. We recommend using gloves that are as form-fitting as possible for best results.
If your visor has fingerprints or smudges, use the microfiber cleaning cloth that came with the HoloLens to clean your visor gently.
Can't connect to Wi-Fi
Here are some things to try if you can't connect your HoloLens to a Wi-Fi network:
- Make sure that Wi-Fi is turned on. To check, use the Start gesture, then select Settings > Network & Internet > Wi-Fi. If Wi-Fi is on, try turning it off and then on again.
- Move closer to the router or access point.
- Restart your Wi-Fi router, then restart HoloLens. Try connecting again.
- If none of these things work, check to make sure that your router is using the latest firmware. You can find this information on the manufacturer website.
Bluetooth devices aren't pairing
If you're having problems pairing a Bluetooth device, try the following:
- Go to Settings > Devices, and make sure that Bluetooth is turned on. If it is, turn it off and on again.
- Make sure that your Bluetooth device is fully charged or has fresh batteries.
- If you still can't connect, restart the HoloLens.
USB-C Microphone isn't working
Be aware that some USB-C microphones incorrectly report themselves as both a microphone and a speaker. This is a problem with the microphone and not with HoloLens. When plugging one of these microphones into HoloLens, sound may be lost. Fortunately there is a simple fix.
In Settings -> System -> Sound, explicitly set the built-in speakers (Analog Feature Audio Driver) as the Default device. HoloLens should remember this setting even if the microphone is removed and reconnected later.
Devices listed as available in Settings don't work
HoloLens (1st gen) doesn't support Bluetooth audio profiles. Bluetooth audio devices, such as speakers and headsets, may appear as available in HoloLens settings, but they aren't supported.
HoloLens 2 supports the Bluetooth A2DP audio profile for stereo playback. The Bluetooth Hands Free profile which enables microphone capture from a Bluetooth peripheral is not supported on HoloLens 2.
If you're having trouble using a Bluetooth device, make sure that it's a supported device. Supported devices include the following:
- English-language QWERTY Bluetooth keyboards (you can use these anywhere that you use the holographic keyboard).
- Bluetooth mice.
- The HoloLens clicker.
You can pair other Bluetooth HID and GATT devices together with your HoloLens. However, you may have to install corresponding companion apps from Microsoft Store to actually use the devices.
Submit and view feedback for